Lanturi cu role si zale scurte comanda    oferta  
STAS 5174, DIN 8187 SERIE EUROPEANA EUROPEAN SEARIES
Simbol lant p b1
min		 b2
max		 d1
max		 d2
max		 e g
max		 ai
max		 k
max		 FR
min		 M
mm in mm mm mm mm mm mm mm mm N kg/m
10B-1 15.875 5/8'' 9.65 13.28 10.16 5.80 - 14.7 19.6 4.1 22400 0.95
10B-2 16.59 36.2 40000 1.35
10B-3 16.59 52.8 60000 2.20
12B-1 19.05 3/4'' 11.68 15.62 12.07 5.72 - 16.1 22.7 4.6 29000 1.25
12B-2 19.46 42.2 53000 2.50
12B-3 19.46 61.7 80000 3.80
16B-1 25.40 1'' 17.02 25.40 15.88 8.28 - 21.0 36.1 5.4 60000 2.70
16B-2 31.88 68.0 106000 5.40
16B-3 31.88 99.9 160000 8.00
20B-1 31.75 1 1/4'' 19.56 29.00 19.05 10.19 - 26.4 43.2 6.1 95000 3.60
20B-2 36.45 79.0 170000 7.20
20B-3 36.45 116.0 250000 11.00
02B-1 12.7 1/2'' 7.75 11.3 8.51 4.45 - 11.8 17 3.9 18000 0.70
08B-2 12.7 1/2'' 7.75 11.3 8.51 4.45 13.92 11.8 31 3.9 32000 1.35

Observatie:
- Numarul de zale ale unei garnituri este numarul total de zale - interioare si exterioare - inclusiv zaua de legatura. Lungimea lantului (garniturii) se obtine prin inmultirea numarului de zale cu pasul lantului (valoarea in mm din tabel).
- Se recomanda folosirea garniturilor de lant cu numar par de zale, folosind zaua de legatura "c".
- In cazul garniturilor de lant cu un numar impar de zale, inchiderea se face cu za cotita "d" plus za de legatura "c" situatie pentru care sarcina de rupere indicata in tabele se reduce la 0.8 din initial, fapt pentru care situatia este de evitat in cazul conditilor grele de lucru.
- Masa informativa pentru metru liniar este valabila pentru lanturi fara zale de legatura sau zale cotite. 		Remarks:
- The number of links of a set is the total number of links - inside and outside - including the connecting links. The lenght of the chain (set) is to be optained by multiplying the number of links by the pitch of the chain (mm value in table).
- We recommend the use of chian sets with an even number of links, using the "c" type connecting link.
- In the case of chain sets with an uneven number of links, the end of the chain has an offset link "d" and a connecting link "c". The breaking strength which is mentioned in the tables decreses at 0.8 of it's value. This situation is to be avoided in the case of heavy duty working conditions.


 
  sus   comanda    oferta  
STAS 5174, DIN 8188 SERIE AMERICANA AMERICAN SERIES
Simbol lant p b1
min		 b2
max		 d1
max		 d2
max		 e g
max		 ai
max		 k
max		 FR
min		 M
mm in mm mm mm mm mm mm mm mm N kg/m
12A-1 19.05 3/4'' 12.70 17.75 11.91 5.94 - 18.08 26.9 4.6 32000 1.52
12A-2 22.78 49.8 64000 2.90
12A-3 22.78 72.6 96000 4.40
12A-4 22.78 95.3 128000 5.80
16A-1 25.40 1'' 15.88 22.61 15.88 7.92 - 24.13 33.5 5.4 60000 2.60
16A-2 29.29 62.7 114000 5.10
16A-3 29.29 91.9 171000 7.70
16A-4 29.29 121.4 228000 10.10
20A-1 31.75 1 1/4'' 19.05 27.46 19.05 9.53 - 30.18 41.4 6.1 89000 3.85
20A-2 35.75 77.0 177000 7.50
20A-3 35.75 113.0 266000 11.30
20A-4 35.75 148.4 355000 14.95
20A-4 35.75 219.9 532000 22.90
24A-1 38.10 1 1/2'' 25.40 35.46 22.23 11.10 - 36.20 50.8 6.6 127000 5.90
24A-2 45.44 96.3 254000 11.50
24A-3 45.44 141.7 381000 17.10
24A-4 45.44 187.2 508000 22.90
24A-5 45.44 278.0 762000 34.60
24A-6 45.44 369.0 1016000 45.90
24A-7 45.44 460.0 1270000 59.00
28A-1 44.45 1 3/4'' 25.40 37.19 25.40 12.70 - 48.26 54.9 7.4 173000 7.50
28A-2 48.87 103.7 345000 14.90
28A-3 48.87 152.4 518000 22.10
28A-4 48.87 201.5 688000 29.60
28A-5 48.87 299.3 1032000 43.90
28A-6 48.87 396.3 1376000 60.50
28A-7 48.87 494.6 1720000 80.70
32A-1 50.80 2'' 31.75 45.21 28.58 14.27 - 48.26 65.5 7.9 227000 9.90
32A-2 58.55 124.2 454000 19.40
32A-3 58.55 182.9 681000 28.60
32A-4 58.55 241.2 908000 33.80
40A-1 63.50 2 1/2'' 38.10 54.89 39.80 19.84 - 60.33 80.3 10.2 354000 17.20
40A-2 71.55 151.9 708000 33.50
40A-3 71.55 223.5 1062000 49.60
40A-4 71.55 295.1 1416000 66.50
48A-1 76.20 3'' 47.63 67.82 47.63 23.80 - 72.39 95.5 10.5 510000 22.60
48A-2 87.83 183.4 1020000 44.10
48A-3 87.83 271.3 1530000 65.50



 
Lanturi Flyer (Flyer Chains) sus    comanda     oferta  

STAS 4833


Tip P   a
max		 B
max		 d2
max		 S
max		 g
max		 FR
max		 M
LL 1222 19.05 3/4 2x2 10.4 16 5.94 2.4 15.62 32000 0.9
LL 1244 4x4 20.4 25 64000 1.7
LL 1266 6x6 30.4 35 96000 2.6
LL 1622 25.40 1 2x2 13.8 21 7.92 3.2 20.83 48000 1.6
LL 1644 4x4 26.9 32 96000 3.1
LL 1666 6x6 40.3 46 144000 4.6
LL 2022 31.75 1 1/4 2x2 16.7 24 9.53 4.0 26.04 71000 2.4
LL 2044 4x4 35.2 41 142000 4.7
LL 2066 6x6 50.2 55 213000 7.0
LL 2422 38.10 1 1/2 2x2 19.8 26 11.10 4.8 31.24 100000 3.5
LL 2444 4x4 39.8 45 200000 6.9
LL 2466 6x6 59.8 66 300000 10.2
LL 2822 44.45 1 3/4 2x2 23.4 30 12.70 5.6 36.45 137000 4.9
LL 2844 4x4 47.4 54 274000 9.5
LL 2866 6x6 70.4 75 411000 14.2
LL 3222 50.80 2 2x2 26.9 34 14.27 6.4 41.66 181000 6.1
LL 3244 4x4 53.8 61 362000 11.9
LL 3266 6x6 80.8 88 543000 17.7

La intelegere se pot livra lanturi cu pas 63.5. De asemenea in variante 8x8, 10x10 sau 12x12.
If agreed between the supplier and the purchaser there can be delivered chains having the pitch of 63.5 and also in variants of 8x8, 10x10, 12x12
 



 

Lanturi cu role si zale lungi sus   comanda     oferta  

STAS 4239, DIN 8188 AGRICOLE NID 5886 AGRICULTURAL CHAINS

Tip p b1
min		 b2
max		 d1
max		 d2
max		 g
max		 k
max		 b4
max		 Fr
min		 M Obs.
mm in mm mm mm mm mm mm mm N kg/m
212A 38.10 1 1/2'' 12.70 17.75 11.91 5.94 18.08 4.6 26.9 32000 0.95 STAS
4239
DIN 8181
216A 50.80 2'' 15.88 22.61 15.88 7.92 24.13 5.4 33.5 57000 1.90
C12    40 - 22.00 28.40 12.00 6.00 17.50 2.80 38.0 35000 1.60 NID 5886
(agricol)
SLP38 38 - 22.00 29.60 16.00 9.00 21.50 3.0 42.0 35000 2.3

Observatie:
Lanturile C12 si SLP38 se pot echipa cu zale speciale pentru uzul masinilor agricole. 		Remarks:
C12 and SLP38 can be equiped with special links for agricultural machines
 



 

Lanturi transportoare (Conveying chains) sus    comanda     oferta  

STAS 10075, DIN 8167

Tip p b1
min		 b2
max		 d1
max		 d2
max		 g
max		 k
max		 b4
max		 Fr
min		 M
mm in mm mm mm mm mm mm mm N kg/m
M 112 100 - 31 44.5 30 15 40 5.5 66 112000 7.3
M 224 250 - 43 59.0 42 21 60 6.5 87 224000 11.7
M 112 160 - 32.1 44.7 30 15 40 5.5 66 112000 7.6

Observatie:
Lanturile C12 si SLP38 se pot echipa cu zale speciale pentru uzul masinilor agricole. 		Remarks:
C12 and SLP38 can be equiped with special links for agricultural machines
 


Lanturi cu bolturi gaurite Hollow Pin Chains sus     comanda     oferta  
STAS 10075, DIN 8167

Tip p b1
min		 d1
max		 d
±0.2		 B
max		 g
max		 FR
min		 M
mm in mm mm mm mm mm N kg/m
OMO 50 50.8 2 10 30 8.2 26 26 32000 3.2
OMO 100 101.6 4 10 30 8.2 26 26 32000 1.9

   

 

 

Lanturi cu eclise drepte Chains with Straight Link Plates sus    comanda     oferta  

p b1
min		 b2
max		 d1
max		 d2
max		 g
max		 A
max		 Fr
min		 M
in mm mm mm mm mm mm mm N kg/m
1" 25.4 15.88 22.61 15.88 7.92 24.13 36.5 60000 3.050
1 1/2" 38.1 25.40 35.46 22.23 11.10 35 54.6 100000 6.520
2" 50.8 31.75 45.21 28.58 14.27 48.11 68.6 227000 11.425
2 1/2" 63.5 38.10 54.89 39.80 19.84 60.33 83.4 354000 19.137

Observatie:
Toate lanturile transportoare se pot echipa cu eclise speciale specifice operatiunii de transport.		 Remarks:
All conveying chains can be equiped with special links for specific transport operations.
Copyright 2006 Independenta S.A.      Design by Creativ Solution